SuperStack II switch 3300 XM
The SuperStack II Switch 3300 XM delivers break through pricing for 10/100 Ethernet/Fast Ethernet switching, saving customers up to 50 percent over comparable competitive solutions. The 3300 XM does not have the optional expansion slot in the back and is perfect for use as the 2nd, 3rd & 4th switch in the stack.
The SuperStack® II Switch 3300 XM connects:
- your existing 10Mbps devices.
- high-performance workgroups with a 100Mbps backbone or server connection.
- users to dedicated 100Mbps ports in one switch.
In addition, as part of the 3Com® SuperStack II range of products,
you can combine it with any SuperStack II system as your network grows.
Summary of Features
The Switch has the following hardware features:
- 24 Fast Ethernet auto-negotiating 10BASE-T/100BASE-TX ports
- One Matrix Port for connecting units from the Switch 1100/3300 family to
form a stack. This enables you to:
- Connect two units back-to-back using a single Matrix Cable
- Stack the Switch with up to three other units in the Switch 1100/3300
family, when one of the units is a Switch 3300 MM unit
- SuperStack II architecture
- Connects to Redundant Power System/Advanced Redundant Power System
- 19-inch rack or stand-alone mounting
10BASE-T/
100BASE-TX Ports
The Switch has 24 auto-negotiating 10BASE-T/100BASE-TX ports configured as
MDIX (cross-over). These ports can be set to 10BASE-T half duplex, 10BASE-T full
duplex, 100BASE-TX half duplex, 100BASE-TX full duplex, or they can
automatically detect the speed and duplex mode of a link and provide the
appropriate connection. The maximum segment length is 100m (328ft) over Category
5 twisted pair cable.
Power Socket
The Switch automatically adjusts its power setting to any supply voltage in
the range 90-240V A.C.
Redundant Power System Socket
To protect against internal power supply failure, you can use this socket to
connect a SuperStack II Advanced Redundant Power System (ARPS) to the Switch.
Console Port
The console port allows you to connect a terminal and perform remote or local
out-of-band management. The console port uses standard null modem cable and is
set to auto-baud, 8 data bits, no parity and 1 stop bit.
Matrix Port
The Matrix Port allows you to:
- Stack the Switch with another unit in the Switch 1100/3300 family using a
single Matrix Cable
- Stack the Switch with up to three other units in the Switch 1100/3300
family, when one of the units is a Switch 3300 MM unit
(Click here for More Info)
|
