HOME
|
ENTER NEW SHOPPING CART
|
EMAIL REQUEST TO SALES
3Com LinkBuilder FMS II 24 Port Hub 2 50 Pin Telco
3Com Stock #:
3C16672
LinkBuilder / SuperStack II Hub 10 Telco The SuperStack II Hub 10 Telco (3C16672 / 3C16672A) has two 12 port Telco connectors on the front panel providing Ethernet TP port connections, and an AUI port on the rear panel. The rear panel also has a slot for a 3Com Transceiver Module or Bridge MicroModule: if fitted the module will operate in addition to the AUI port. A range of different media Transceiver Modules is available from 3Com (see "Products and Bulletin Boards"). The Hub 10 Telco can be stand-alone or linked with other Hub 10, LinkBuilder FMS II, FMS, 10Base-T or 10Base-Ti units to form a stack of units of different media. Stacking units gives you the benefit of a higher port count while the stack is still seen by the network as a single 802.3 repeater. The Hub 10 Telco is suited for use in the office where it can be wall-mounted, rack-mounted, or free standing. Alternatively, the unit can be rack-mounted in a wiring closet or equipment room. A mounting kit is supplied. The Hub 10 Telco can be powered either from the AC mains supply, or through an optional 3Com Redundant Power System (3C565047) to provide a more reliable supply. Contact your local supplier for details. Repeater Functions The Hub 10 Telco has been designed to conform to the IEEE 802.3 standard for Local Area Networks. The unit provides all the standard functions of an 802.3 repeater, including: Signal retiming Preamble regeneration Fragment extension Automatic partition/reconnection Management A SuperStack II Hub 10 Management Module (3C16630A) or Advanced RMON Module (3C16632) can be fitted to the Hub 10 Telco to provide full SNMP management, including statistics, resilient links and security features. Only one Management Module or Advanced RMON Module is required for each stack. Refer to the guides accompanying the module for details on how to manage an Hub 10 unit or stack. Resilience and Security Hub 10 Management Module (3C16630A) and Hub 10 Advanced RMON Module (3C16632) offer resilience and security features. Up to 16 resilient link pairs can be configured via management software. To avoid the creation of loops during power-up, Hub 10 units provide a Disable On Boot switch. If this switch is set to disable, all TP ports on the unit will be disabled during power-up until they are correctly configured and enabled by management software. This is only necessary on units which have ports assigned as standby. Standby ports in resilient link pairs can only be configured on SuperStack II Hub 10 or LinkBuilder FMS II units. Security features are described in the manual which comes with your Hub 10 Management Module. By disabling ports on boot up and enabling them with management software, you provide extra security for your unit.
Features:
VIEW ARE NEW SECURE
REAL TIME SHOPPING CART
TO PURCHASE THIS PRODUCT
< CLICK HERE >
Windows XP users
this site requires JAVA
Click here to download Java.
[
<< Store Entrance
]
[
All Products
] [
AccessBuilder
] [
AirConnect
] [
CommServer
] [
CoreBuilder
] [
DynamicAccess
] [
HomeConnect
] [
LinkBuilder
] [
NetBuilder
] [
OfficeConnect
] [
PathBuilder
] [
SuperStack
] [
Transcend
] [
HUB
] [
MODEM
] [
NIC
] [
PCMCIA
] [
RACK
] [
ROUTER
] [
SWITCH
] [
ONline
] [
4 Port
] [
8 Port
] [
12 Port
] [
16 Port
] [
24 Port
] [
36 Port
] [
48 Port
] [
Add on Equipment
] [
Power Supplies
] [
Software
] [
Specially Discounted
] [
Scratch and Dent
] [
ebay
] [
Private Members
]
[
Checkout >>
]
If you need assistance with
ordering please
email us
or
call 949-830-4228
.
Copyright © 1998 - 2004,
Zero One Networking (www.all3com.com)
. All rights reserved.
www.all3Com.com
This page last modified on
